潮濕冷凝環境 紫外光加速老化試驗機,紫外線加速耐候試驗機,紫外光耐氣候試驗箱,紫外老化測試儀
在很多戶外環境中，材料每天的潮濕時間可長達12小時。研究表明造成這種戶外潮濕的主要因素是露水，而不是雨水。Q8/UV通過獨特的冷凝功能來模擬戶外的潮濕侵蝕。在試驗過程中的冷凝循環中，測試室底部蓄水池中的水被加熱以產生熱蒸氣，并充滿整個測試室，熱蒸汽使測試室內的相對濕度維持在100％，并保持一個相對高溫。試樣被固定在測試室的側壁，從而試樣的測試面曝露在測試室內的環境空氣中。試樣向外的一面暴露在自然環境中具有冷卻效果，導致試樣內外表面具備溫差，這一溫差的出現導致試樣在整個冷凝循環過程中，其測試面始終有冷凝生成的液態水。
由于戶外曝曬接觸潮濕的時間每天可以長達十幾小時，因此典型的冷凝循環一般持續幾個小時。Q8/UV提供兩種潮濕模擬方法。應用最多的是冷凝方法，它是模擬戶外潮濕侵蝕的最好方法。所有的Q8/UV型號都可運行冷凝循環。因?yàn)橛行?yīng)用條件也要求使用水噴淋以達到實際的效果，所以有些Q8/UV型號既可運行冷凝循環又可運行水噴淋循環。
照射強度控制：可選 紫外光加速老化試驗機,紫外線加速耐候試驗機,紫外光耐氣候試驗箱,紫外老化測試儀
選配照射強度控制選件可得到精確型和重復性好的測試結果；光強控制系統允許用戶根據不同的測試要求設置不同的光照強度。通過其反饋回路裝置精確控制照射強度；同時也可以延長熒光燈的使用壽命
|
型號 Model
|
Q8/UV3
|
Q8/UV2
|
Q8/UV1
|
|
UV 照射 Exposure
|
●
|
●
|
●
|
|
冷凝 Condensation
|
●
|
●
|
●
|
|
光照控制 Irradiancs Control
|
●
|
●
|
|
|
可調光線 Adjustable irradiance
|
●
|
●
|
|
|
噴水 Water Spray
|
●
|
|
|
|
熱沖擊 Thermal Shock
|
●
|
|
|
|
自動偵路 Self-diagnostics
|
●
|
●
|
●
|
|
燈泡數量 Lamp Q'ty
|
紫外線燈管 8 支，備品 4 支 Ultravloiet lamp 6pcs, spares 4 pcs （美國Q-LAB,Q-Panel,美國ATLAS,UVA340,UVB313,UVC351）
|
|
記錄器 Recorder
|
選配 （Optional）
|
|
輻射計 Q8-CR Calibration Radiometer
|
選配 （Optional）
機器輻射強度：
1.0W／m2／340nm以?xún)?nèi)可調
1.1W／m2／313nm以?xún)?nèi)可調
|
|
UV 溫度 Temp
|
50 ℃ -75 ℃
|
|
冷凝溫度 Condensation Temp
|
40 ℃ -60 ℃
|
|
測試容量 Test Capacity
|
48pcs 片/se spray（ 75 x 150m m ）
50pcs片/basic （ 75 x 150m m ）
|
|
水涼及耗量 Water
|
蒸餾水每分鐘 蒸餾水每日 8 公升
|
|
體積 Dimension（W x D x H）
|
137 x 53 x 136cm
|
|
重量 Weight
|
136kg
|
|
電源 Power
|
1 ψ ， 120V/60Hz,16A or 230V/50Hz, 9A,1800W（max）
|
Q8/UV紫外光加速老化試驗機測試方法
通用
? ISO 4892-1 Plastics- Methods of exposure to laboratory light sources-Part 1: General Guidance
? ASTM G-151, Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
? ASTM G-154, Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Non-Metallic Materials
? British Standard BS 2782: Part 5, Method 540B （Methods of Exposure to Lab Light Sources）
? SAE J2020, Accelerated Exp. of Automotive Exterior Materials Using a Fluorescent UV/Condensation Apparatus
? JIS D 0205, Test Method of Weatherability for Automotive Parts （Japan）
? GB/T 16422.1，塑料實驗室光源暴露試驗方法 第1部分：總則
________________________________________
涂料
? ISO 11507, Paints & varnishes-Exposure of coatings to artificial weathering-Exposure to fluorescent UV and water
? ISO 20340, Paints & varnishes –Performance requirements for protective paint systems for offshore and
related structures
? ASTM D-3794, Standard Guide for Testing Coil Coatings
? ASTM D-4587, Standard Practice for Light/Water Exposure of Paint
? US Government, FED-STD-141B
? US Govt., Federal Specification TT-E-489H, Enamel, Alkyd, Gloss, Low VOC Content
? US Govt., Federal Specification TT-E-527D, Enamel, Alkyd, Lusterless, Low VOC Content
? US Govt., Federal Specification TT-E-529G, Enamel, Alkyd, Semigloss, Low VOC Content
? US Govt., Federal Specification TT-P-19D Paint, Latex, Acrylic Emulsion, Ext. Wood & Masonry
? NACE Standard TM-01-84 Procedures for Screening Atmospheric Surfaced coatings
? GM4367M Topcoat Materials - Exterior
? GM 9125P Laboratory Accelerated Exposure of Automotive Material
? Korean Standard M5982-1990, Test Method for Accelerated Weathering
? Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
? Israeli Standard No. 330, Steel Windows
? Israeli Standard No. 385, Plastic Windows
? Israeli Standard No. 935, Road Marking Paint
? Israeli Standard No. 1086, Aluminum Windows
? NISSAN M0007, Fluorescent UV/Condensation Test
? JIS K 5600-7-8, Testing Methods for Paints
? MS 133: Part F16, Methods of Test for Paints and Varnishes: Part F16: Exposure of Coatings to Artificial Weathering- Exposure to Fluorescent UV and Water （ISO 11507）
? NBR-15.380 Paints for buildings–Methods for performance evaluation of paints for non-industrial buildings – Resistance to UV irradiation/water vapor condensation, by accelerated test
? prEN 927-6 Paints & varnishes–Coating materials and coating systems for exterior wood – Pt. 6: Exposure of wood coatings to artificial weathering using fluorescent UV and water
? GB/T 12967.4，鋁及鋁合金陽極氧化 著色陽極 氧化膜耐紫外光性能的測定
________________________________________
紡織品
? AATCC Test Method 186, Weather Resistance: UV Light and Moisture Exposure
? ACFFA Test Method for Colorfastness of Vinyl Coated Polyester Fabrics
________________________________________
印刷油墨
? ASTM F1945, Lightfastness of Ink Jet Prints Exposed to Indoor Fluorescent Lighting ________________________________________
橡膠
? GB/T 16585，硫化橡膠人工氣候老化（熒光紫外燈）試驗方法
________________________________________
電工電子產品
? GB/T 19394，光伏（PV）組件紫外試驗
type the link here
________________________________________
粘合劑和密封劑
? ASTM C 1501, Standard Test Method For Color Stability of Building Construction Sealants as Determined byLaboratory Accelerated Weathering Procedures
? ASTM C-1184, Specification for Structural Silicone Sealants
? ASTM C-1442, Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
? ASTM D-904, Standard Practice for Exposure of Adhesive Specimens to Artificial Light
? ASTM D-5215, Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
? American Plywood Assn., Approval Procedures for Synthetic Patching Materials, Section 6
? Spanish Std, UNE 104-281-88 Accelerated Testing of Paints and Adhesives with Fluorescent UV Lamps
________________________________________
塑料
? ISO 4892 Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
? DIN 53 384, Testing of plastics, Artificial Weathering and Exposure to Artificial Light
? Spanish Standard UNE 53.104 （Stability of Plastics Materials Exposed to Simulated Sunlight）
? Israeli Standard No. 385, Plastic Windows
? JIS K 7350, Plastics - Methods of Exposure to Laboratory Light Sources-Part 3: Fluorescent UV Lamps
? ASTM D-1248, Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
? ASTM D-4329, Standard Practice for Light/Water Exposure of Plastics
? ASTM D-4674, Test Method for Accelerated Testing for Color Stability of Plastics Exposed to Indoor
Fluorescent Lighting and Window-Filtered Daylight
? ASTM D-5208, Standard Practice for Exposure of Photodegradable Plastics
? ASTM D-6662, Standard Specification for Plastic Lumber Decking Boards
? ANSI C57.12.28 Specification for Accelerated Weathering of Padmounted Equipment Enclosure Integrity
? ANSI, A14.5 Specification for Accelerated Weathering of Portable Reinforced Plastic Ladders
? Edison Electrical Inst. Specification for Accelerated Weathering of Padmounted Equip. Enclosure Integrity
? Wisconsin Electric Power Specification for Polyethylene Signs
? GB/T 18950，橡膠和塑料軟管 靜態下耐紫外線性能測定
? GB/T 16422.3，塑料實驗室光源暴露試驗方法 第3部分：熒光紫外燈
________________________________________
屋頂材料
? ASTM D-4799, Test Method for Accelerated Weathering of Bituminous Roofing Materials
? ASTM D-4811, Standard Specification for Nonvulcanized Rubber Sheet Used as Roof Flashing
? ASTM D-3105, List of Test Methods for Elastomeric and Plastomeric Roofing & Waterproofing
? ASTM D-4434, Standard Specification for PVC Sheet Roofing
? ASTM D-5019, Standard Specification for Reinforced Non-Vulcanized Polymeric Sheet Used in Roofing Membrane
? ANSI/RMA IPR-1-1990 Req. for Non-Reinforced Black EPDM Sheet for Roofing Membrane
? ANSI/RMA IPR-2-1990 Req. for Fabric-Reinforced Black EPDM Sheet for Roofing Membrane
? ANSI/RMA IPR-5-1990 Req. for Non-Reinforced Non-Black EPDM Sheet for Roofing Membrane
? ANSI/RMA IPR-6-1990 Req. for Fabric-Reinforced Non-Black EPDM Sheet for Roofing Membrane
? British Standard BS 903: Part A54 Annex A & D, Methods of Testing Vulcanized Rubber
? CGSB-37.54-M, Canadian General Standards Board Spec. for PVC Roofing & Waterproofing Membrane
? DIN EN 534, Corrugated bitumen sheets
? EOTA TR 010, Exposure procedure for artificial weathering
? RMA Specification for Reinforced Non-Vulcanized Chlorosulfonated Polyethylene Sheet for Roofing Membrane
________________________________________
復合材料
? Israeli Standard No. 385, Anodic Coatings on Aluminum
________________________________________
紫外光加速老化試驗機,紫外線加速耐候試驗機,紫外光耐氣候試驗箱,紫外老化測試儀
